AUTONET TV

Light Up your Life (Headlamp Replacement)

Did you know that having a burned out headlight can result in your rearview mirror reflecting some flashing lights? In other words, you might get pulled over by the police for only having one working headlight, because in most places it's against the law. 

Not only is it illegal to drive with one headlight burned out, but it's also dangerous. You can't see down the road nearly as well at night with only one headlight, and other drivers can't see you as easily either.

The good news is many newer vehicles warn you when one of your headlamps burns out. When that happens, have it taken care of as soon as you can.  While there was a time when all headlamps were pretty much the same, the same isn't true these days. There are halogen, Xenon, LED and other technologies used in modern vehicles.  Plus there are sealed beams (like those on older vehicles) and capsules.

If you have a burned out headlamp, ask your service advisor for recommendations.  Usually when one side goes, the other isn’t far behind. Many suggest replacing both headlamps at the same time.  Your vehicle's owner's manual can tell you what the manufacturer recommends.  You also can ask your service advisor about upgrading to a headlight that might give you better visibility. 

In order to make sure you're able to see down the road the way your vehicle was designed and not blind oncoming drivers, it's vital that new headlights be aimed properly.  That's another good reason to have this service performed by a technician. Now, that's a really bright idea.

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

The Light Many Drivers Fear (Check Engine Light)

Ask just about any driver about one thing they fear seeing inside their vehicle and they'll say it's the Check Engine light coming on. You know, that little light on your instrument panel that is in the shape of a vehicle engine, often accompanied by the words Check, Check Engine, Check Engine Service, or Service Engine Soon.

There are so many different reasons that light shows up, from something as simple as a loose gas cap to a more serious problem that requires immediate attention. 

The Check Engine light comes on because a component of your vehicle's onboard diagnostics system is telling you something isn't operating normally. Your vehicle has a lot of sensors built in, all tied together by computers.  When the sensors are showing that things somewhere aren't functioning the way they should be, they alert the vehicle's diagnostic computers and tell you something's amiss.

The simple rule is if the Check Engine light is on steadily, it's something you should have checked soon but it's not urgent.  If it's flashing or has turned red or orange instead of yellow, get your vehicle checked out as soon as possible.  If you don't, you may be facing some costly repairs.

Here are a few problem areas that may trigger your Check Engine Light. 

• Something's wrong with the emissions equipment.  Maybe too much fuel is getting into the catalytic converter, or the exhaust gas recirculation system isn't working right.  Because some of these components are expensive to replace, it's worthwhile to have a technician look at your vehicle sooner rather than later.
• Your ignition system isn't working right.  That means spark plugs, coils, and wires.  If your engine is misfiring, that could translate into an illuminated Check Engine light.
• The transmission isn't behaving the way it should.  The transmission works in tandem with the engine, so if a sensor sees something wrong there, it will tell the vehicle to turn on the Check Engine light.

As you can see, there are many things that can cause the light to come on, and when it does, it really is a good idea to find out why.  When you bring your vehicle in, we have an electronic device that can read a code or multiple codes stored in your vehicle's computers.  That will provide the technician with clues pointing to the cause of the trouble and helps pinpoint where that trouble is. 

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

Bad Vibrations (Brake Rotor Replacement)

If you’ve ever stepped on your brake pedal and felt your vehicle vibrate, that’s a signal that you shouldn’t ignore.  A pulsating brake pedal is a sign that something is wrong.  Braking action should be smooth, sure, and quiet, not shaky and noisy.

Most newer vehicles have disc brakes, called that because they have a round, flat disc connected to each wheel.  Those discs are the rotors. Other parts called brake pads are squeezed against those discs when you press on the brake pedal.

Remember that vibration we mentioned? That can be caused by the rotor not having a straight, true surface. Rotors can heat up from friction and warp.  They can become thinner from constant wear.  Rotors can rust from the elements they’re exposed to, such as rain, snow ice, and salt.  They can get grooves in them from so many contacts with the pads. 

The signs of worn rotors are vibrations, grooves on the rotor (which you can see sometimes through open spots in the wheel) noise such as squealing or scraping when you brake, and increased stopping distance.   

While it used to be common for rotors to be machined (shaved down to restore their flat surface), newer vehicles have thinner rotors, so your service adviser may suggest you replace rotors when they start showing signs of significant wear.

Brakes are important safety equipment for every vehicle.  They enhance your control while driving, so it’s important that they be regularly inspected and maintained.  A good time is when you have your tires rotated. A technician can then look at all components of your brakes and recommend any service you may need to keep your brakes in top shape.

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274