AUTONET TV

The Right Stuff (Choosing Replacement Parts)

Let's face it.  Vehicles are complicated machines, each having thousands of parts.  And since they're subjected to heat, cold, vibrations, bumps and much more, these parts wear out and need to be replaced. 

When your service advisor says you need a new part, you may have many options.  Let's say you need a new muffler.  One choice would be to get exactly the same part that was installed when the vehicle was manufactured.  The advantages are that it will perform the same way as the one it's replacing and will likely last about the same amount of time as the original.

Some mufflers are made by the same companies that supplied the automaker when your vehicle was new (they call that an OEM part—Original Equipment Manufacturer).  And often those are the same as the part you'd buy from a dealer. A reputable vehicle service facility will know which ones these are because they replace mufflers all the time and do their homework.

The good news is there are many different mufflers available from several manufacturers.  These are called aftermarket parts. Some of them may use different metals or a different construction technique. Some may sound a little sportier while some may make your engine perform better.  Your service advisor will discuss what your driving habits are and help choose the part that's best for you.

You may be able to get a part that's better than the one originally installed.  Here's an example.  A repair shop discovered one owner's vehicle had developed cracks and leaks in the hoses that attach to the heater core.  They were made of plastic, and heat and pressure had caused the originals to crack.  The service advisor recommended they replace it with an aftermarket part that was made of aluminum instead, one that was more durable than the original part.

Some aftermarket parts cost more, some cost about the same or less.  Depending on how and where you drive and what you want out of your vehicle, you can decide to buy more economical parts which might be the best fit for your needs.  Or you may decide to upgrade to a better, more expensive part.

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

Water Everywhere (Clogged Drains)

It's bad enough when you mistakenly leave a window open in your vehicle on a rainy day and you find your carpet soaked.  But what in the world is going on when your windows are closed tight, not leaking and you STILL wind up with wet carpet? The answer could be something you might not even know your vehicle has.

And the answer is? Drains. And those drains can get clogged.  Yes, your vehicle has several drains with tubes or hoses attached to them that you really never see.  There are some in and around the hood that channel rainwater down to the ground.  There are some that take condensation from the air conditioner and allow it to flow outside.  And if your vehicle has a retractable sunroof or moon roof, there are small drains at each corner that connect to tubes that go through the vehicle body down to an exit near the ground. 

Considering all the leaves, dirt, dust and other debris your vehicle encounters on a daily basis, it's not surprising that these drains can get blocked.  Then when it rains, that water winds up going to the place of least resistance.  Sometimes, that's inside the cabin where it shows up as wet carpeting.

So, what's the solution?  You may be tempted to see if you can clean out those drains yourself.  But there are many people who have tried blowing condensed air in the drains only to find that they literally blow the tubes off of their connections inside the vehicle's body.  Reattaching those can be a time-consuming, labor-intensive, expensive proposition.

A trained technician has the equipment and knowledge to clear out those drains properly. To prevent clogged drains, regular maintenance is the key, so when your vehicle is in for other periodic maintenance like oil changes and tire rotations, the technician can make sure all drains are clear and flowing like they should.

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

Wired! (Battery Cable Service)

Colder weather brings out the worst in a vehicle's battery.  On a very cold day, you may have experienced that your engine cranks slowly when starting.  But while it may be the battery itself, it may also be the parts that transfer the power to other the other electrical components, the battery cables.  After all, you have to have some way to get the current out of the battery and out to where it needs to go.

Battery cables have a couple of enemies: corrosion and age.  You may have looked under the hood and noticed a light-colored powder or crust around the terminals.  That's what happens when acids corrode the ends of the battery terminals.  Corrosion inhibits the connection and may reduce the amount of power getting to the electrical accessories to the point where they are not working correctly, if at all.

Here are some symptoms of problems with your battery cables. You might notice a clicking sound when you turn the key, some of your vehicle's electrical parts (like the sound system or the horn) don't work or, in some cases, the vehicle won't start at all.

When you take your vehicle to a repair facility, the technician will use instruments to check voltages to see how much current is getting to what location. That includes a starter draw test during which the battery's voltage is checked when the starter is cranked.  The technician will also visually inspect the cables and the charging system. To make sure the alternator is putting out the right voltage, the technician will measure that as well. 

If the problem is found to be the battery cable assembly, the entire set may have to be replaced. Sometimes they can be repaired. 

During the colder months, it's vital that your vehicle has the proper power going to its electrical components.  Having a vehicle that won't start or run smoothly is not something you want to battle with when you're already up against challenging weather.  Keep your electrons flowing… and your vehicle moving.

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

Power Failure (Broken Power Seat)

Know anyone who doesn't love a power seat in an SUV, a car, truck or van? They're convenient and precise in their adjustments.  But when they break, oh, what a pain.  Not only is it inconvenient, it may leave your seat position too close to the steering wheel or too far from the pedals.  This is a must-fix problem.

There are many things that cause a power seat to fail:

• Seat controls.  These are either at the side of the seat or in the door.  Both are places that can be exposed to moisture or other contaminants.  When the controls stop working, they usually need to be replaced.
• Seat motor.  Electric motors are what make a power seat move, and sometimes they fail.  Sometimes they just get worked to death and die of old age.  Replacement is the most common remedy.
• Fuses. A power seat is, after all, powered by electricity and all vehicle power systems have fuses to protect them.  A technician can determine which fuse may have blown and replace it.  But it's also important to figure out what caused the fuse to blow and deal with that, too.
• Wires.  There are wires under the seats that move when you move the seat.  Sometimes they get stretched, kinked or ripped.  In a power seat malfunction, it may be a wiring harness that needs to be replaced.
• Gears.  They help the seat move and may need to be realigned or replaced.
• Obstructions.  Yes, a piece of trash or a kid's toy has been known to jam up the works of a power seat. Taking them out of the mechanism may get your seat working again.

Most people pay extra to have power seats in a vehicle. So make sure you keep that convenient feature working. And don't forget that it's a safety issue, too.

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274